Fiberroad Technology Co., Limited
Fiberroad Technology Co., Limited PoE Switch Industrial Media Converter DWDM CWDM SFP+ XFP QSFP+ CFP Module Equipment Manufacturers
Add to Cart
XFP To SFP+ 10G Media Converter
FR600-202R series products are high-performance 10G optical signals Repeaters, realize the optical signal equilibrium amplification, clock extraction and plastic regeneration, extended optical signal transmission distance greatly.
Using Optical - Electrical - Optical wavelength conversion and WDM (DWDM/CWDM) technology, cooperate WDM device can achieve optical signals transmit in a single fiber by single or multiple way over a long distance.
Application:
SDH/SONET STM-64/OC-192, 10G fiber channel, 10G Ethernet
Features:
Support 2U Rack (16 channel) and independent use
support network management (Web SNMP, Console),
Support a WEB form and simple network management protocol SNMP mode. A WEB management can let user to allows monitor and manage the card status easily; Support SNMP unified network management platform
support ITUT prescribed DWDM/CWDM wavelength
transmission rate:9.95 Gb/s - 11.35 Gb/s
3R function (balanced amplification, Timing Clock Obtaining , Shapping and regeneration), good dispersion management function, data transmission rippon at low.
Transparent Transport for data, less delay
support DMI function for SFP module (Diagnostic Monitoring with), can detect light power change
support Loopback test function
support hot plugging
state indicator light is complete
Easy installation
Technical Information:
| Performance Data | Technical Indexes |
| Equipment function | 3R Repeater |
| Transmission Speed | 10Gb/s (9.95Gb/s-11.35Gb/s ) |
| Access Type
| STM-64/ OC-192/ 10G Etherne/ 10G fibre channel |
| Interface Type | SFP+ to/from SFP+ |
| Transmission Distance | Up to SFP module (Max 80Km ) |
| Local SFP+ | Support 10G SFP+/CWDM/DWDM, Specific optical parameters please refer different modules's parameters |
| Remote SFP+ | Support 10G SFP+/CWDM/DWDM, Specific optical parameters please refer different modules's parameters |
| power requirement | rackmountable : AC 85 ～ 220V OR DC -48V dual-supply, optional Standalone: AC 220V OR -48V Power consumption: ≤4W |
| Work Environment | Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃ Humidity: 5%~90% (non-condensing ) |
|
Dimension
| Card : 11.5mm (W)× 78mm (D) Standalone : 156mm (W)* 128mm (D) * 32mm (H) |
