Fiberroad Technology Co., Limited
Fiberroad Technology Co., Limited PoE Switch Industrial Media Converter DWDM CWDM SFP+ XFP QSFP+ CFP Module Equipment Manufacturers
Add to Cart
Network PoE Ethernet Switch / Industrial PoE Industrial Switch 8 Port
PoE Ethernet Switch Brief introduction
PoE Ethernet Switch is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users. The industrial switch complies with various characteristics such as mini size, no fan, low power consumption, high reliability and stability, and easy to maintain.
PoE Ethernet Switch Features
> 8x10/100/1000Base-TX, 2x100/1000 Base-FX SFP/ 8xPoE
> Support Auto-MDIX, and full/half duplex self-negotiation mode
> Support IPv6 Protocol
> Electric 4KV surge protection
> Complete status indicator, working state at a glance
> Power input polarity protection design, no worry about wrong operation
PoE Ethernet Switch Parameters
| Physical Port | |
| RJ45 Port and Speed | 8x10/100/1000Base-TX |
| Fiber Port and Speed | 2x100/1000Base-FX SFP |
| Parameters | |
| Ethernet Standards | IEEE802.3 IEEE802.3u IEEE802.3z IEEE802.3ab IEEE802.3x IEEE802.3az IEEE802.3Qad IEEE802.3ah IEEE802.1X IEEE802.1Q IEEE1588 |
| Packet Buffer | 4M |
| Maximum Packet Length | Up to 10K |
| MAC Address Table | 8K |
| Transmission Mode | Store and Forward (full/half duplex mode) |
| Exchange Property | Delay Time: < 7μs Backplane Bandwidth: 20Gbps; Packet Forwarding Rate: 14.88Mpps |
| PoE | |
| PoE Standard | 8x IEEE 802.3af/IEEE 802.3at PoE |
| Power Budget | Max. PoE output power budget 30W |
| LED Indicator | |
| Power | Connect-always |
| RJ45 | Link/Act: Connect-Always; Data Exchange-Twinkle |
| Fiber | Link/Act: Connect-Always; Data Exchange-Twinkle |
PoE Ethernet Switch Dimensions
PoE Ethernet Switch Specification
|
Software Features | Redundant network: STP, RSTP, MSTP, IT-T G.8032 Ethernet Ring Protection Switching (ERPS) for redundant cabling |
| ERPS/ Ring for Redundant Cabling, recovery time<20ms in 250 devices | |
| Multicast: IGMP snooping V1/V2/V3 | |
| VLAN: IEEE 802.1Q 4K VLAN, GVRP, GMRP, QINQ | |
| Link Aggregation: Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation | |
| Management Function: CLI, Web based management, SNMP v1/v2c/v3, Telnet/SSH server for management | |
| Diagnostic Maintenance: Port mirroring, Ping | |
| Alarm management: 1 way relay alarm output, RMON, SNMP Trap RMON, MIB II, Port mirroring, Event syslog, DNS, SNTP, IEEE 802.1ab LLDP | |
| Security: DHCP Server/Client/Relay option 82/Snooping User hierarchical management | |
| Flexibility security: Port based and MAC based IEEE 802.1X, ACL, HTTP/HTTPS, SSL/SSH v2 Data control Port-based ingress/egress speed limit, Full duplex IEEE 802.3x, half duplex back-pressure flow control. Broadcast storm suppression, Unknown-Multicast suppression and Unknown-Unicast suppression | |
| Software upgrade via HTTP, redundant firmware to avoid upgrade failure |