Functional Converter Card 2x1.25G1000Base-X to 1x2.5G 1000Base-X Multiplexer
The Gigabit Ethernet Multiplexer aggregates 2 port Gigabit Ethernet into 1 port 2.5G uplink, reducing the conversion CAPEX and increasing the fiber utilization effectively. The multiplexer can be used either in point-to-point topology fuctioning as a media converter for transporting two Gigabit Ethernet services over one fiber or in CWDM system working as a wavelength converter for extending the system’s transmits- sion capacity doubly. The multiplexer is equipped with three SFP-based ports: SFP1 is 2.5G uplink port, SFP2 and SFP3 are Gigabit Ethernet service ports.The multiplexer must be used in couples.
Specification
| Transmission Distance | Twisted-pa: 100M (standard CAT5/CAT5e cable)
SFP, Distance depend on plug-in Fiber Tranceiver |
| Forwarding Mode | Store-and-forward |
| Forwarding Frame Length | 9000Bytes |
| Function Features | Provide 3 standard SFP slots: 2 x GE ports at the client side 1 x 2.5G ports at the line side;
2 x GE ports at the client side are isolated from each other;
Support cross mapping of the data of all ports;
Support statistics on error packet of each port;
Support loopback setting of the client side and the line side;
Support SNMP network management.
|
| Power Requirement | Operating Voltage DC 5V
Rated Current: 1A
Power Consumption: Full-load<4W |
Environmental
Requirement | Operating Temperature: 0℃~50℃
Storage Temperature : -10℃~ 55℃
Relative Humidity: 5%~95%
MTBF: 56,000 h
Enclosure: Metal |
| Dimensions | 120mm(H)×90mm(D)× 22mm(W) |
| Weight | 100g |
| Warranty | 1 Year |
| Emissions | FCC Class A, CE Class A |
Dimensions
