Fiber Media Converter Card 10/100/1000Base-TX to 1000Base-FX SFP
10/100/1000Base-TX to 1000Base-FX SFP Managed Media Converter Card can be used in 16-slot multifunctional management system, which is a Ethernet and SDH transmission equipment, support mutiple services including managed media converter card, OEO Converter card, 1+1 protection switching card, CWDM/DWDM MUX/DEMUX Card, etc. supports protocols like SNMP, WEB, CONSOLE and TELNET ,with a strong management function , and operate easily to meet different customer's requirement.
Fiber Media Converter Card Features
- Supporting 10/100/1000M, full/half duplex autosensing
- Supporting auto-MDI/MDIX
- Supporting SFP transceiver, 1*9 transceiver optional
- Support SFP DMI(Diagnostic Monitoring Interface) function
- Supporting 850nm, 1310nm, 1550nm and DWDM/CWDM wavelength ruled by ITUT
- Max. 2046 bytes packet at store-and-forward mode; Max. 9K bytes packet at cut-through
- Rate Limit function, 64Kbps
- Supporting Loopback, precisely locating the failure, convenient for link test
- Supporting LFP, quickly locates the failure
- Supporting remote power off alarming
- Economical management function within bandwidth, supporting 802.3ah and TS 1000
- With powerful network management function, supporting WEB and SNMP
- Supporting hot plug
- Supporting Remote management
- Easy installation with complete LED indicators for working situation
- Supporting 2U chassis (16 slots) and standalone use
Fiber Media Converter Card Specification
| Transmission Distance | Twisted-pa: 100M (standard CAT5/CAT5e cable) SFP: Distance depend on plug-in Fiber Tranceiver
Fiber: MM 500m/2km, SM 20/40/60/80/120km |
| Forwarding Mode | Store-and-forward or Pass-Through |
| Forwarding Frame Length | 2046Bytes |
| LFP mode | Support |
| DIP Switches | DIP-1: Copper forced mode/auto-negotiation mode
DIP-2: Copper speed 100Mbps/1000Mbps
DIP-3: Copper Forwarding mode
DIP-4: LFP mode |
| Software Features | Supports LFPT (Link Fault Pass Through)
Supports Digital Diagnostic Monitor Interface (DDMI) for SFP
Web/SNMP/EMS management
Supports OAM/IP in-band management
Ingress/Egress Bandwidth control per port
Supports 16 IEEE 802.1Q Tag VLAN Group
SNMP alarm trap for power loss and port link down
Remote loop back test
Dying gasp (remote power failure detection) |
| Power Requirement | Operating Voltage DC 5V
Rated Current: 0.5A
Power Consumption: Full-load<4W |
| Environmental Requirement | Operating Temperature: 0℃~50℃
Storage Temperature : -10℃~ 70℃
Relative Humidity: 5%~95%
MTBF: 56,000 h
Enclosure: Metal |
| Dimensions | 120mm(H)×90mm(D)× 22mm(W) |
| Weight | 100g |
| Warranty | 1 Year |
| Emissions | FCC Class A, CE Class A |
Dimensions
Ordering Information
| P/N | Description | X | X | X | X |
| FR-6103-XXXX | 10/100/1000Base-TX to 1000Base-FX Media Converter Card | S: Duplex Single-mode M: Duplex Multi-mode B: Simplex Single-mode SFP: SFP Slot | 3: TX 1310nm 4: TX 1490nm 5: TX 1550nm 8: TX 850nm | S: SC F: FC T: ST L: LC | 05: 550M 2: 2KM 20: 20KM 40: 40KM |
| FR-6103R-XXXX | 10/100/1000Base-TX to 1000Base-FX Media Converter (Remote Standalone) |
