Fiberroad Technology Co., Limited
Fiberroad Technology Co., Limited PoE Switch Industrial Media Converter DWDM CWDM SFP+ XFP QSFP+ CFP Module Equipment Manufacturers
Add to Cart
10G OEO Converter Card XFP to XFP 3R Repeater 10G Fiber Channel
10G OEO Converter 3R Repeater Card is XFP to XFP Slot (with SFP+ to SFP+, SFP+ to XFP slot optional), which uses optical-electricity-optical conversion principle to realize optical signal regeneration, enabling of the optical signal amplification and regeneration, re-timing, and wavelength conversion, with coarse/dense wavelength division multiplexing together to realized WDM transmission. It is now possible to quickly improve communication capacity, expand the bandwidth on present network, while using low-cost, high cost-effective solutions to manage and run the system, easy operation.
The XFP to XFP 10G Fiber Converter Card can be used in 16-slot multifunctional management system, which is a Ethernet and SDH transmission equipment,support mutiple services including managed media converter card, OEO Converter card, 1+1 protection switching card, CWDM/DWDM MUX/DEMUX Card, etc., supports protocols like SNMP, WEB, CONSOLE and TELNET, with a strong management function, and operate easily to meet different customer's requirement.
Key Features
Specification
| Technical Parameter | |
| 3R Repeater | Support |
| Transmission Speed | 10Gb/s (9.95Gb/s-11.32Gb/s) |
| Protocols | IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM) |
| Access Type | 10G LAN/ 10G WAN |
| Interface Type | Type A: XFP To/From XFP |
| Type B: SFP+ To/From SFP+ | |
| Type C: SFP+ To/From XFP | |
| Transmission Distance | XFP/SFP+ module: up to 80Km |
| Maximum Packet | 14,880,950/S |
Network | • Card type information |
| • SFP+ or XFP fiber module detection | |
| • SFP+ or XFP fiber module DMI function (Temperature,Voltage, Optical power) | |
| • Link status detector | |
| • Enable/Disabled Loopback test function | |
| • Enable/Disable PRBS Generator and checker function | |
| • Rate select 10Gbase-Lan or Wan) | |
| • Remote card's status monitor (only in pairs) | |
| Power requirement | Rack-mountable : AC 85~ 220V or DC 48V |
| Standalone: AC 220V or DC 48V | |
| Power consumption: ≤15W | |
| Work Environment | Operating Temp: 0~ 50 ℃ |
| Storage Temp: -10~ 70 ℃ | |
| Humidity: 5%~90% (non-condensing) | |
| Dimension | Standalone: 156mm (W) × 128mm (D) × 32mm (H) |
| Card: 115mm (W) × 78mm (D) |
Ordering information
| P/N | Description | Remarks |
| FR-6603R-XX | 10G OEO Converter Card (3R Repeater) | XFP to XFP |
| FR-6603R-SX | 10G OEO Converter Card (3R Repeater) | SFP+ to XFP |
| FR-6603R-SS | 10G OEO Converter Card (3R Repeater) | SFP+ to SFP+ |