Fiberroad Technology Co., Limited
Fiberroad Technology Co., Limited PoE Switch Industrial Media Converter DWDM CWDM SFP+ XFP QSFP+ CFP Module Equipment Manufacturers
Add to Cart
PSE POE Powered Switch 100Base-FX Media Converter WIth Shielded RJ-45
FR200 series is a 10/100Base-TX to 100Base-FX media converter, which allows two types of network
segment to be connected easily. Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3at or IEEE802.3af powered device (PD) over CAT5/CAT5e UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function, etc. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.
| Technical Specifications: | |
| Data Rates: | 10/100 Mbps (802.3 10Base-T/802.3u 100Base-T) |
| 100Mbps (100Base-FX) | |
|
Input Power Requirements: |
|
| Input voltage: | 100 VAC to 240 VAC |
| Input frequency : | 47 Hz to 63 Hz |
|
Power over Ethernet Output: |
|
|
Pin Assignment and Polarity |
|
|
For IEEE802.3af standard: |
4/5 (V+),7/8 (V-) (default) |
|
For IEEE802.3at standard (30Watts maximum): |
4/5 (V+),7/8 (V-) (default) |
|
For IEEE802.3at standard (50Watts maximum): |
1/2/4/5 (V+),3/6/7/8 (V-) (default) |
| Output Power: |
please refer to ordering information |
| Efficiency: | 75% min |
| Short circuit protection: |
auto recovery |
| Over current protection | auto recovery |
|
Environmental Conditions: |
|
| Operating temperature: | 0℃ to 50℃ |
| Cooling: | free air convection |
| Storage temperature: | -20℃ to +85℃ |
| Operating Humidity: |
90% max, non-condensing |
|
Mechanical Specifications: |
|
| Case Material: |
Iron |
| Case Color: | Black |
| Net Weight: | 550g approx. / unit |
| Dimensions: |
110(W) x 40(H) x 140(L) (mm) |
|
Connectors: |
|
| AC Inlet: | IEC-J-4 |
| LAN: | Shielded RJ-45 |
| Fiber: | see ordering information |
| Warranty : |
1 year hardware warranty |
| *Specifications subject to change without notice | |
Ordering Information:
|
Part |
Supported |
Output |
Output |
Output |
Remark |
|
FR200S-XX-XXX |
IEEE 802.3af |
48V |
0.35A max |
15.4W max |
default |
|
FR200-XX-XXX |
IEEE 802.3af |
48V |
0.54A max |
25W max |
default |
|
FR200T-XX-XXX |
IEEE 802.3at |
52V |
0.60A max |
30W max |
default |
|
FR200H-XX-XXX |
IEEE 802.3at |
52V |
1.00A max |
50W max |
optional |
|
FR200B-XX-XXX |
Non-standard |
48V |
0.60A max |
30W max |
optional |
|
FR200C-XX-XXX |
Non-standard |
24V |
1.20A max |
30W max |
optional |
*XX-XXX: supports optic connector / fiber type and distance. For more details, please refer to the list below or contact us.
|
Suffix |
Description |
Suffix |
Description |
|
SC-M02 |
SC, Multi-Mode, 2km / 1300nm |
BS3-S20 |
BiDi SC, Single-Mode, 20km , 1310/1550nm |
|
SC-S20 |
SC, Single-Mode, 20km , 1310nm |
BS3-S40 |
BiDi SC, Single-Mode, 40km , 1310/1550nm |
|
SC-S40 |
SC, Single-Mode, 40km , 1310nm |
BS5-S20 |
BiDi SC, Single-Mode, 20km , 1550/1310nm |
|
SC-S60 |
SC, Single-Mode, 60km , 1310nm |
BS5-S40 |
BiDi SC, Single-Mode, 40km , 1550/1310nm |
|
SC-S80 |
SC, Single-Mode, 80km , 1550nm |
|
|